CONTROL TECHNOLOGY LLC

Leica GS18 T + CS20 LTE Rover Kit

The recommended kit of the Leica GS18 T rover with a CS20 controller, the Captivate Survey & Stakeout CS20 field software product, a standard set of accessories for working in the field. The receiver is equipped with an inertial system for measuring hard-to-reach points. The improved signal processing system reduces the impact of interference when working in difficult conditions. This model is equipped with a GSM module for data transmission via mobile networks.

S-MAX GEO Rover Kit + Smartphone + Satellite Software (SMG-001 NON)

A new field GNSS receiver of geodetic class S-Max GEO with the ability to work only from GLONASS signals. At the same time, it is capable of processing satellite signals from all existing (GPS, GLONASS) and developing satellite groupings (Beidou, Galileo), as well as differential correction systems (QZSS, SBAS) with L-Band CenterPointRTX support.

RTK Rover Set Spectra SP85 Radio + Trimble TSC 7

The Spectra SP85 Radio RTK rover with a Trimble TSC7 field controller is equipped with a board capable of operating on 600 channels. The updated antenna allows you to function in conditions of dense buildings and among trees. The controller is equipped with a touch screen and a full physical keyboard, which makes it easier to use in the field.

RT RTK Rover Radio Spectra SP85 + Trimble TSC3 + BY Research Office

The Spectra SP85 Radio RTK rover with the Spectra Ranger 3XC field controller is equipped with a board capable of operating on 600 channels. The updated antenna allows you to function in conditions of dense buildings and among trees. The controller is equipped with an anti-glare screen and a full physical keyboard, which makes it easier to use in the field.

RT RTK ровер Радио Spectra SP85 + Ranger 3XC

The Spectra SP85 Radio RTK rover with the Spectra Ranger 3XC field controller is equipped with a board capable of operating on 600 channels. The updated antenna allows you to function in conditions of dense buildings and among trees. The controller is equipped with an anti-glare screen and a full physical keyboard, which makes it easier to use in the field.

RT RTK Rover Radio Spectra SP85 + Ranger 7 + BY Geodetic Office

The radio-controlled RTK-rover Spectra SP85 with the Spectra Ranger 3XC field controller is equipped with a board capable of operating on 600 channels. The updated antenna allows you to function in conditions of dense buildings and among trees. The controller is equipped with an anti-glare screen and a full-fledged physical keyboard, which facilitates its use in the field.

Kit RTK Rover Leica GS18 T GSM/UHF

The Leica GS18 T GNSS rover kit consists of a signal receiver, a Leica CS20 controller, a milestone, as well as basic software and a SMARTnet subscription year. The antenna is equipped with an inertial system for measuring hard-to-reach points. The improved signal processing system reduces the impact of interference when working in difficult conditions.

RT RTK Rover Leica GS18 GSM, Rover CS20 Disto

The Leica GS18 T GNSS rover kit consists of a signal receiver, a Leica CS20 controller, a milestone, as well as basic software and a SMARTnet subscription year. The antenna is equipped with an inertial system for measuring hard-to-reach points. The improved signal processing system reduces the impact of interference when working in difficult conditions.

GSM Rover Kit Leica GS18 I

The Leica GS18 I rover kit is on a milestone with a CS20 controller for operation in the coverage area of its own base station or RTK network. The kit also includes additional options, batteries for the receiver and controller, a memory card, Leica Captivate Shooting and Breakdown software, as well as an Active Assist license. The antenna is equipped with an inertial system for measuring hard-to-reach points. The visual control system allows you to take pictures and take measurements of distant objects, both in the field and in the office conditions.

Kit RTK Rover Leica GS18 T GSM/UHF, Rover CS20

The Leica GS18 T GNSS rover kit consists of a signal receiver, a Leica CS20 controller, a milestone, as well as basic software and a SMARTnet subscription year. The antenna is equipped with an inertial system for measuring hard-to-reach points. Improved signal processing system reduces the impact of interference when working in difficult conditions

RT RTK rover Leica GS16 GSM+Radio

The Leica GS16 GNSS rover kit consists of a signal receiver, a Leica CS20 controller, milestones, basic software and accessories for getting started quickly. The built-in Leica Captivate software package allows you to synchronize with Leica equipment for information exchange and processing. The improved signal processing system reduces the impact of interference when working in difficult conditions.

GSM-UHF Rover Leica GS18 I

The Leica GS18 I GNSS rover kit consists of a signal receiver, a Leica CS20 controller, a milestone, as well as basic software. The antenna is equipped with an inertial system for measuring hard-to-reach points. The visual control system allows you to take pictures and take measurements of distant objects, both in the field and in the office conditions.

Kit RTK Rover Leica GS10 GSM+UHF

The Leica GS10 GNSS rover kit consists of an antenna, a receiver, a CS20 field controller, a modem, as well as the necessary software to get started quickly. The Leica AS11 antenna is capable of receiving a signal in difficult conditions, and a stable phase center simplifies the installation of the complex.

Kit RTK Rover Leica GS07, CS20 Disto + Radio

RTK rover Leica GS07, CS20 GSM + Radio is a ready-to-use kit of RTK rover Leica GS07 with a built-in 3.75G GSM modem and an external radio modem included, a Leica CS20 Disto controller with a 3.75G GSM modem. The kit is designed for measurements in the RTK correction reception mode. Includes powerful Leica Captivate field software

GeoMax Zenith40 RTK Rover Kit + eSurvey P8II

The GeoMax Zenith40 (GSM) GNSS receiver with eSurvey P8II controller is designed to obtain coordinates by satellite methods with an accuracy of 3 mm + 0.5 ppm. The Precise Point Positioning mode ensures proper operation in areas without RTK correction coverage. This model is equipped with GeoMax X-PAD Ultimate GO software.

RTK Rover Kit Rusnavgeoset Phase 2 ROVER for Geophysics

PHASE 2 is a powerful, reliable and multifunctional device for solving a wide range of GNSS positioning tasks in real time and post-processing.

Kit RTK Rover S-MAX GEO Radio + Trimble TSC3 TA

A new field GNSS receiver of geodetic class S-Max GEO with the ability to work only from GLONASS signals. At the same time, it is capable of processing satellite signals from all existing (GPS, GLONASS) and developing satellite groupings (Beidou, Galileo), as well as differential correction systems (QZSS, SBAS) with L-Band CenterPointRTX support.

Sokkia GRX3 UHF/GSM + Archer2 GNSS Receiver Kit

Sokkia Company presents the latest GRX3 receiver, combining the most modern technologies, compactness and versatility.

Kit RTK Rover GeoMax Zenith35 Pro GSM/UHF TAG, xPad Win

Zenith35 Pro receiver kit (555 channels) with integrated TAG module (for measurements with an inclined milestone), GSM and radio modems, WLAN and Bluetooth modules, GPS and GLONASS, BeiDou and Galileo signals reception, multi-system, 5 Hz positioning frequency: receiver, 1 battery, charger, GSM antenna, xPad software, Zenius X controller, mounting the controller to the milestone, USB cable, brief instruction manual, CD ROM, milestone ZPC200 2.5 m, radio antenna ZRA101 (or ZRA100), Compass calibration tool ZVC601, case

Kit RTK Rover GeoMax Zenith35 Pro TAG Radio

The GeoMax Zenith35 Pro TAG (GSM+UHF) xPad Ultimate GNSS receiver with the E-Survey P8II controller is designed to obtain coordinates by satellite methods with an accuracy of 3 mm + 0.5 ppm in plan and 5 mm + 0.5 ppm in height. TAG technology allows you to determine the position of points without direct access. This model is equipped with GeoMax X-PAD Ultimate software, as well as BeiDou and Galileo navigation systems.

Kit RTK Rover GeoMax Zenith40 GSM/UHF, ZeniusX A, xPad Ultimate

The GeoMax Zenith40 (GSM-UHF) xPad Ultimate GNSS receiver with ZeniusX A controller is designed to obtain coordinates by satellite methods with an accuracy of 3 mm + 0.5 ppm in plan and 5 mm + 0.5 ppm in height. The Precise Point Positioning mode ensures proper operation in areas without RTK correction coverage. This model is equipped with GeoMax X-PAD Ultimate Survey GNSS software.

Sokkia GCX3 + T-18 GNSS Receiver Kit

The Sokkia GCX3 rover kit with a T-18 controller, which is designed to operate from networks of permanent base stations.

Sokkia GRX3 kit with UHF/GSM and SHC6000 controller with GSM

A set of Trimble SHC6000 field controller and two Sokkia GRX3 receivers with UHF/GSM. The tablet is equipped with a 4-core processor and runs on the Windows 10 Pro platform. This ensures convenient use of both mobile and office software, even in the field.

Set 2 Topcon GR-5 with UHF/GSM and FC-500 controller with GSM

A set of Topcon FC500 field controller, two Topcon GR-5 receivers with UHF/GSM, milestone mounts, Magnet Field software, 2 memory cards. Additional technologies are installed in the receivers that increase the accuracy of shooting.

Kit RTK Rover Leica GS18 T GSM/UHF, Rover CS35, 1 year Smartnet

GNSS kit RTK rover Leica GS 18 T GSM / UHF for use in kinematics mode. It includes a rover with a built-in GSM modem and UHF antenna, a multifunctional Leica CS35 tablet controller with Leica Captivate field software, all additional necessary software and accessories.

ABOUT US

modern updating of goods

24/7 SUPPORT

Quality Control

wide range of products